# Siemens Addressing in Ignition Scada

**URL:** <https://forum.inductiveautomation.com/t/siemens-addressing-in-ignition-scada/27694>\
**Category:** Ignition\
**Created:** [August 23, 2019, 4:31am UTC](https://forum.inductiveautomation.com/t/siemens-addressing-in-ignition-scada/27694 "2019-08-23T04:31:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sandeep\_Bakoliya](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Sandeep\_Bakoliya](https://forum.inductiveautomation.com/u/Sandeep_Bakoliya)\
**Post date:** [August 23, 2019, 4:31am UTC](https://forum.inductiveautomation.com/t/siemens-addressing-in-ignition-scada/27694/1 "2019-08-23T04:31:04Z")

</div>

Dear all,

I am not able to use DB addressing in ignition SCADA, Please tell me how can I use the following addressin ignition SCADA.

DB1.DBX0.0 --\>  
DB1.DBB2  
DB1.DBW4  
DB1.DBD6

Regards  
Sandeep

---

<div class="post-metadata">

**Author:** ![chi](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@chi](https://forum.inductiveautomation.com/u/chi)\
**Post date:** [August 23, 2019, 6:06am UTC](https://forum.inductiveautomation.com/t/siemens-addressing-in-ignition-scada/27694/2 "2019-08-23T06:06:27Z")

</div>

The addressing is described in the manual [here](https://docs.inductiveautomation.com/display/DOC80/Siemens).

```auto
DB1.DBX0.0 -> DB1,X0.0
DB1.DBB2 -> DB1,B2
DB1.DBW4 -> DB1,W4
DB1.DBD6 -> DB1,D6 or DB1,REAL6

```

---

<div class="post-metadata">

**Author:** ![Sandeep\_Bakoliya](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Sandeep\_Bakoliya](https://forum.inductiveautomation.com/u/Sandeep_Bakoliya)\
**Post date:** [August 23, 2019, 6:09am UTC](https://forum.inductiveautomation.com/t/siemens-addressing-in-ignition-scada/27694/3 "2019-08-23T06:09:52Z")

</div>

Thnaks chi.