# Siemens Addressing **URL:** \ **Category:** Ignition\ **Created:** [November 4, 2018, 7:12am UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522 "2018-11-04T07:12:22Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![mansoorahmedd04](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@mansoorahmedd04](https://forum.inductiveautomation.com/u/mansoorahmedd04)\ **Post date:** [November 4, 2018, 7:12am UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522/1 "2018-11-04T07:12:22Z")
Hi sir hope you are fine i want to tag tia portal’s s71200 tags with ignition Tell me how i tag Real value Integer Word Double word Timer Counter Sir i need an urgent reply i am preparing a short project. ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [November 4, 2018, 1:54pm UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522/2 "2018-11-04T13:54:25Z")
[https://docs.inductiveautomation.com/display/DOC79/Siemens#Siemens-ConfiguringSiemensAddressing](https://docs.inductiveautomation.com/display/DOC79/Siemens#Siemens-ConfiguringSiemensAddressing) ---
**Author:** ![mansoorahmedd04](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@mansoorahmedd04](https://forum.inductiveautomation.com/u/mansoorahmedd04)\ **Post date:** [November 5, 2018, 2:26pm UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522/3 "2018-11-05T14:26:27Z")
Idid not understand how to tagg tia portal integer word double word please help me ---
**Author:** ![chi](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@chi](https://forum.inductiveautomation.com/u/chi)\ **Post date:** [November 5, 2018, 3:01pm UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522/4 "2018-11-05T15:01:36Z")
You can not use TIA Portal symbolic addresses with Ignition’s Siemens driver. Only absolut adresses as described [here](https://docs.inductiveautomation.com/display/DOC79/Siemens#Siemens-ConfiguringSiemensAddressing) will work. We may help you further if you can give us some more details about your problem. ---
**Author:** ![mansoorahmedd04](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@mansoorahmedd04](https://forum.inductiveautomation.com/u/mansoorahmedd04)\ **Post date:** [November 5, 2018, 3:48pm UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522/5 "2018-11-05T15:48:07Z")
Sorry dear i could not understand . Just one tag i successfully created. M4.0 = Mx4.0 data type=boolean If Iw64=? Data type=? Md66=? Data type=? Mw33=? Data type = ? T0=? Data type =? C0=? Data type= ? Qw=? Data type= ? Please help ---
**Author:** ![mansoorahmedd04](https://avatars.discourse-cdn.com/v4/letter/m/f9ae1b/32.png) [@mansoorahmedd04](https://forum.inductiveautomation.com/u/mansoorahmedd04)\ **Post date:** [November 5, 2018, 2:29pm UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522/6 "2018-11-05T14:29:30Z")
How to tag real double word and integer timer display would you like to help me i am searching help from three days. My e mail is [mansoorahmedd04@gmail.com](mailto:mansoorahmedd04@gmail.com) Please send me the procedure how to type iw64 in ignition and what to select in data type integer or string or what i will select ---
**Author:** ![chi](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@chi](https://forum.inductiveautomation.com/u/chi)\ **Post date:** [November 5, 2018, 7:04pm UTC](https://forum.inductiveautomation.com/t/siemens-addressing/20522/7 "2018-11-05T19:04:08Z")
> [@mansoorahmedd04](#): > > Iw64=? Data type=? From the manual linked above (did you look at it at all?): `INPUT Area Syntax: I` Since IW64 is a 16 bit word, it can only be of Datatype `Word Syntax:W Unsigned` or `Int Syntax I Signed` so if you want it unsigned the address is `IW64`, if you want it signed the address is `II64`. Same for MD66: `FLAGS Area Syntax M` (M is German for Merker, the English word is Flag). MD66 is a double word (32 bit), so Datatype can be `DWord Syntax: D Unsigned` or `DInt Syntax: DI Signed` or `Real Syntax: REAL Signed` so valid addresses are `MD66`, `MDI66` or `MREAL66`. Only you can know what datatype you want. Also from the manual: `No DataType is specified for Timers`, so T0 is simply `T0`. This only works with S7-300 cpu's, Ignnitions Siemens driver does not support timers for S7-1200 or 1500 cpu's. It is recommended to buy a license for the in build OPC-UA server for this processors instead of using the Ignition driver.