# Siemen's PLC Sim Advanced

**URL:** <https://forum.inductiveautomation.com/t/siemens-plc-sim-advanced/19740>\
**Category:** Ignition\
**Created:** [September 19, 2018, 7:00pm UTC](https://forum.inductiveautomation.com/t/siemens-plc-sim-advanced/19740 "2018-09-19T19:00:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![giulianacaula](https://avatars.discourse-cdn.com/v4/letter/g/779978/32.png) [@giulianacaula](https://forum.inductiveautomation.com/u/giulianacaula)\
**Post date:** [September 19, 2018, 7:00pm UTC](https://forum.inductiveautomation.com/t/siemens-plc-sim-advanced/19740/1 "2018-09-19T19:00:05Z")

</div>

Hi everyone,

Did someone test the new Siemens’ PLCSim Advanced ?  
It supposed to connect with Ignition without using the NetToPLC program.  
I tried but I couldn’t make it work.

If someone could and is so kind to share, I’ll be very much appreciated.  
Thanks in advanced

---

<div class="post-metadata">

**Author:** ![jespinmartin1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jespinmartin1/32/57175_2.png) [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\
**Post date:** [January 31, 2020, 4:06pm UTC](https://forum.inductiveautomation.com/t/siemens-plc-sim-advanced/19740/2 "2020-01-31T16:06:18Z")

</div>

Have you solved the problem?

---

<div class="post-metadata">

**Author:** ![quince](https://avatars.discourse-cdn.com/v4/letter/q/839c29/32.png) [@quince](https://forum.inductiveautomation.com/u/quince)\
**Post date:** [September 13, 2020, 9:18pm UTC](https://forum.inductiveautomation.com/t/siemens-plc-sim-advanced/19740/3 "2020-09-13T21:18:13Z")

</div>

I know this is old topic, but yes it is possible to connect Ignition to Siemens PLCSim Advanced without using NetToPLC.

---

<div class="post-metadata">

**Author:** ![jespinmartin1](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jespinmartin1/32/57175_2.png) [@jespinmartin1](https://forum.inductiveautomation.com/u/jespinmartin1)\
**Post date:** [September 22, 2020, 4:32am UTC](https://forum.inductiveautomation.com/t/siemens-plc-sim-advanced/19740/4 "2020-09-22T04:32:27Z")

</div>

Wow this is a old reply hehe. But yes I also find out what was wrong. It is possible!

---

<div class="post-metadata">

**Author:** ![RafaelBacharel](https://avatars.discourse-cdn.com/v4/letter/r/8c91f0/32.png) [@RafaelBacharel](https://forum.inductiveautomation.com/u/RafaelBacharel)\
**Post date:** [July 11, 2024, 9:06pm UTC](https://forum.inductiveautomation.com/t/siemens-plc-sim-advanced/19740/5 "2024-07-11T21:06:47Z")

</div>

Hi quince?

How did you do to connect Igntion to Siemens PLCSim Advanced without using NetToPLC? I am trying a lot of things here but any sucess...