# Siemens S300 & S400 configuration in Siemens interface

**URL:** <https://forum.inductiveautomation.com/t/siemens-s300-s400-configuration-in-siemens-interface/85801>\
**Category:** Ignition\
**Created:** [February 15, 2024, 11:26pm UTC](https://forum.inductiveautomation.com/t/siemens-s300-s400-configuration-in-siemens-interface/85801 "2024-02-15T23:26:48Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alejandro\_Ontiveros](https://avatars.discourse-cdn.com/v4/letter/a/c0e974/32.png) [@Alejandro\_Ontiveros](https://forum.inductiveautomation.com/u/Alejandro_Ontiveros)\
**Post date:** [February 15, 2024, 11:26pm UTC](https://forum.inductiveautomation.com/t/siemens-s300-s400-configuration-in-siemens-interface/85801/1 "2024-02-15T23:26:48Z")

</div>

Hello everyone

I´m going to start a new Ignition project and I want to know if s300 and s400 needs an special configuration in the siemens interface(S7)(permission, port config, etc)

Thank you