# Sierra Raven XE - Default gateway

**URL:** <https://forum.inductiveautomation.com/t/sierra-raven-xe-default-gateway/7299>\
**Category:** General Discussion\
**Created:** [September 23, 2013, 10:26am UTC](https://forum.inductiveautomation.com/t/sierra-raven-xe-default-gateway/7299 "2013-09-23T10:26:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pat.stave](https://avatars.discourse-cdn.com/v4/letter/p/96bed5/32.png) [@pat.stave](https://forum.inductiveautomation.com/u/pat.stave)\
**Post date:** [September 23, 2013, 10:26am UTC](https://forum.inductiveautomation.com/t/sierra-raven-xe-default-gateway/7299/1 "2013-09-23T10:26:52Z")

</div>

How can i set “default gateway” on the Sierra Wireless Raven XE?

The Raven XE is connected to another network segment than the Ignition Gateway, so traffic needs to pass through our gateway.

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [September 25, 2013, 3:33pm UTC](https://forum.inductiveautomation.com/t/sierra-raven-xe-default-gateway/7299/2 "2013-09-25T15:33:38Z")

</div>

You will need to bridge the two networks so you can connect the Raven XE, or, place the Raven XE on the same network segment the Ignition Gateway is on.