# Simple gauge corner radius

**URL:** <https://forum.inductiveautomation.com/t/simple-gauge-corner-radius/51142>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [September 20, 2021, 1:35pm UTC](https://forum.inductiveautomation.com/t/simple-gauge-corner-radius/51142 "2021-09-20T13:35:20Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![zacharyw.larson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/zacharyw.larson/32/23749_2.png) [@zacharyw.larson](https://forum.inductiveautomation.com/u/zacharyw.larson)\
**Post date:** [January 9, 2023, 6:08pm UTC](https://forum.inductiveautomation.com/t/simple-gauge-corner-radius/51142/7 "2023-01-09T18:08:39Z")

</div>

I asked ChatGPT how to do it.

Is this accurate?

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/f/7fb6f1e401f6c290405a631a144f77f60f3a15c1.png)

> [@Project screenshots - share yours](https://forum.inductiveautomation.com/t/project-screenshots-share-yours/513/156):
>
> Hi I’d like to share with you some screens of my first project in Maker Edition ! your feedback is welcomed.

I am making the simple gauges like this except the background color matches the color behind or visibility is reduced via opacity, so the square ends are not visible.

---

_[View the full topic](https://forum.inductiveautomation.com/t/simple-gauge-corner-radius/51142)._