# Slow Communication between 1769-L33ER and Ignition Edge **URL:** \ **Category:** Ignition\ **Tags:** vision\ **Created:** [February 18, 2025, 12:38pm UTC](https://forum.inductiveautomation.com/t/slow-communication-between-1769-l33er-and-ignition-edge/102483 "2025-02-18T12:38:24Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [February 18, 2025, 1:44pm UTC](https://forum.inductiveautomation.com/t/slow-communication-between-1769-l33er-and-ignition-edge/102483/2 "2025-02-18T13:44:54Z")
There are many things you can do, mostly involving structuring the PLC code and data for best performance. In some cases, my 3rd-party alternate driver is needed. Start reading this topic and following all the links: > [@Ignition & Logix Best Practice Tips for better communications](https://forum.inductiveautomation.com/t/ignition-logix-best-practice-tips-for-better-communications/60386): > > Hi All, After a whole bunch of issues I have gone down the rabbit hole of what is wrong with our setup on site. I will preface this by saying I a relatively new to all of this.... so be gentle stuck_out_tongue Based on much reading(such wow) I believe I have a list of things our site could take away for a better system. Some of them are easy to implement, whilst some of them need... significant work to realize. Especially the AOI approach in point 5 expressionless Before going too far a… --- _[View the full topic](https://forum.inductiveautomation.com/t/slow-communication-between-1769-l33er-and-ignition-edge/102483)._