# Slow Input/Output Response **URL:** \ **Category:** Ignition\ **Tags:** vision, ignition81, scripting\ **Created:** [February 7, 2025, 5:53pm UTC](https://forum.inductiveautomation.com/t/slow-input-output-response/102047 "2025-02-07T17:53:00Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [February 7, 2025, 8:30pm UTC](https://forum.inductiveautomation.com/t/slow-input-output-response/102047/8 "2025-02-07T20:30:52Z")
Would your PLC be a Rockwell Logix? If so, you might want to browse through this popular topic (and nested links): > [@Ignition & Logix Best Practice Tips for better communications](https://forum.inductiveautomation.com/t/ignition-logix-best-practice-tips-for-better-communications/60386): > > Hi All, After a whole bunch of issues I have gone down the rabbit hole of what is wrong with our setup on site. I will preface this by saying I a relatively new to all of this.... so be gentle stuck_out_tongue Based on much reading(such wow) I believe I have a list of things our site could take away for a better system. Some of them are easy to implement, whilst some of them need... significant work to realize. Especially the AOI approach in point 5 expressionless Before going too far a… --- _[View the full topic](https://forum.inductiveautomation.com/t/slow-input-output-response/102047)._