# Slow refresh rate **URL:** \ **Category:** General Discussion\ **Tags:** ignition79\ **Created:** [August 11, 2021, 9:11pm UTC](https://forum.inductiveautomation.com/t/slow-refresh-rate/49823 "2021-08-11T21:11:55Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [November 17, 2021, 12:10am UTC](https://forum.inductiveautomation.com/t/slow-refresh-rate/49823/7 "2021-11-17T00:10:18Z")
This is the (my) driver in question: > **[Ignition Third-Party Module Showcase](https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-ethernetip-class-1-communications)** > > Easily extend Ignition's core functionality with Third-Party Modules. The Module Showcase is a great place to find a solution that best meets your needs. See also these two older forum posts: > [@Snappy user interfaces with the Ethernet/IP Module](https://forum.inductiveautomation.com/t/snappy-user-interfaces-with-the-ethernet-ip-module/12617): > > Automation Professionals [Ethernet/IP Class1 Communications Module](https://www.automation-pros.com/modulesales.html) has been in beta for a few months with no recent issues. A release to production use is approaching soon and I thought I’d share a test project and its matching PLC code I’ve been using to exercise the module’s base features. In the simplest setup, this driver presents a virtual I/O chassis to to the outside world, populated with up to 100 virtual I/O modules – I/O modules that also appear to be ControlLogix processors with user… > [@Ethernet/IP I/O Module](https://forum.inductiveautomation.com/t/ethernet-ip-i-o-module/12362): > > Automation Professionals is pleased to announce the public beta for its latest module in the showcase: [Ethernet/IP Class 1 Communications](https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-ethernetip-class-1-communications):[quote]Provides I/O Scanning and I/O Emulation on top of partial emulation of a Logix processor (Controller Tags and User-Defined data types). Use robust, low latency UDP packets to communicate with Logix processors as one or more I/O modules (passive slave mode), and with a variety of Ethernet/IP I/O modules as an I/O scanner (active master mode). With the Co… --- _[View the full topic](https://forum.inductiveautomation.com/t/slow-refresh-rate/49823)._