# Smart TV to Display OEE **URL:** \ **Category:** General Discussion\ **Created:** [October 24, 2011, 8:48pm UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481 "2011-10-24T20:48:29Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![jlr573](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@jlr573](https://forum.inductiveautomation.com/u/jlr573)\ **Post date:** [October 24, 2011, 8:48pm UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481/1 "2011-10-24T20:48:29Z")
We have a customer that is wanting to display current data i.e OEE and line status on TV located throughout the plant. I’m looking for suggestions on what type of hardware I could use to do this. I would think you could just use Ethernet cable and plug it into the network, but I’m finding it hard to see if the TV will run Java. ---
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [October 25, 2011, 5:49pm UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481/2 "2011-10-25T17:49:42Z")
I use a couple of [Samsung 400UXN-2](http://www.samsung.com/us/business/commercial-display-solutions/LH40MRTLBC/ZA) displays here. They have WinXP Embedded on board and the Java install was no issue. ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [October 25, 2011, 6:40pm UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481/3 "2011-10-25T18:40:11Z")
Thanks for posting that, Jordan. Those look pretty dang cool. It looks like the 400UXN-3 is the current model now. Wonder if I can convince the others we need one to play around with… 😆 ---
**Author:** ![Duffanator](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/duffanator/32/3560_2.png) [@Duffanator](https://forum.inductiveautomation.com/u/Duffanator)\ **Post date:** [October 27, 2011, 12:05am UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481/4 "2011-10-27T00:05:52Z")
I was reading through the user manual a bit and it looks like there is a MagicInfo module that goes with it, is that the “PC” or is that something different? I am going to need a display like this sometime in the future so I’d like to figure out what all I’ll need. The display will be in a washdown room as well so how would you deal with a mouse/keyboard if the display is in a IP65/66 enclosure? Some kind of USB extender or KVM extender? ---
**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\ **Post date:** [October 27, 2011, 6:17pm UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481/5 "2011-10-27T18:17:46Z")
The manual kind of stinks. MagicInfo is an app installed on the PC. Wonder if there’s a wireless kb that’s washdown ready… ---
**Author:** ![jlr573](https://avatars.discourse-cdn.com/v4/letter/j/c6cbf5/32.png) [@jlr573](https://forum.inductiveautomation.com/u/jlr573)\ **Post date:** [October 27, 2011, 6:26pm UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481/6 "2011-10-27T18:26:00Z")
We have used these keyboards in grain mill plants very dusty and nasty environment and they hold up well. [wetkeys.com/silver-surf-wire … 103m7w.htm](http://www.wetkeys.com/silver-surf-wireless-mouse-keyboard-S103M7W-p/s103m7w.htm) ---
**Author:** ![WildeKurt](https://avatars.discourse-cdn.com/v4/letter/w/50afbb/32.png) [@WildeKurt](https://forum.inductiveautomation.com/u/WildeKurt)\ **Post date:** [November 10, 2011, 1:07pm UTC](https://forum.inductiveautomation.com/t/smart-tv-to-display-oee/3481/7 "2011-11-10T13:07:57Z")
I use standard HD monitors up to 46" and repurposed PC’s that are in their golden years. When the monitor is a long distance from the PC (usually the case) I then use a VGA over CAT5 extender which is available from TruLink: [http://www.cablestogo.com/product.asp?cat\_id=7026&sku=39959](http://www.cablestogo.com/product.asp?cat_id=7026&sku=39959) They have multiport versions too.