# SNMP function for Ignition version 8 **URL:** \ **Category:** 3rd Party Modules\ **Tags:** ignition81, ignition80, ignition83\ **Created:** [May 29, 2020, 3:22pm UTC](https://forum.inductiveautomation.com/t/snmp-function-for-ignition-version-8/35167 "2020-05-29T15:22:26Z")\ **Posts on this page:** 1\ **Showing post:** 16
**Author:** ![andrew.budaiev](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrew.budaiev/32/72921_2.png) [@andrew.budaiev](https://forum.inductiveautomation.com/u/andrew.budaiev)\ **Post date:** [October 8, 2025, 8:35am UTC](https://forum.inductiveautomation.com/t/snmp-function-for-ignition-version-8/35167/16 "2025-10-08T08:35:57Z")
You can also look into this one (still in beta though). > [@Musson Industrial's Embr-SNMP Module (BETA)](https://forum.inductiveautomation.com/t/musson-industrials-embr-snmp-module-beta/111185): > > Embr-SNMP (BETA) Stability Warning This module is still in beta, and therefore breaking configuration changes may occur between now and the final release. Use at your own risk. This thread is for discussion related to Musson Industrial's Embr-SNMP module. Embr-SNMP provides a set of OPC UA device drivers for SNMPv1, SNMPv2c, and SNMPv3. Usage Install the module. Add your devices under OPC UA/Device Connections. Point your tags at the OPC UA device using the OID as the Node ID. Example (re… --- _[View the full topic](https://forum.inductiveautomation.com/t/snmp-function-for-ignition-version-8/35167)._