# Snmp-Ignition-Module SNMP v3 Setup

**URL:** <https://forum.inductiveautomation.com/t/snmp-ignition-module-snmp-v3-setup/111151>\
**Category:** 3rd Party Modules\
**Tags:** ignition81, scripting, perspective\
**Created:** [October 2, 2025, 7:40am UTC](https://forum.inductiveautomation.com/t/snmp-ignition-module-snmp-v3-setup/111151 "2025-10-02T07:40:44Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![bmusson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bmusson/32/87530_2.png) [@bmusson](https://forum.inductiveautomation.com/u/bmusson)\
**Post date:** [October 3, 2025, 11:28pm UTC](https://forum.inductiveautomation.com/t/snmp-ignition-module-snmp-v3-setup/111151/10 "2025-10-03T23:28:22Z")

</div>

> [@Musson Industrial's Embr-SNMP Module (BETA)](https://forum.inductiveautomation.com/t/musson-industrials-embr-snmp-module-beta/111185):
>
> Embr-SNMP (BETA) Stability Warning This module is still in beta, and therefore breaking configuration changes may occur between now and the final release. Use at your own risk. This thread is for discussion related to Musson Industrial's Embr-SNMP module. Embr-SNMP provides a set of OPC UA device drivers for SNMPv1, SNMPv2c, and SNMPv3. Usage Install the module. Add your devices under OPC UA/Device Connections. Point your tags at the OPC UA device using the OID as the Node ID. Example (re…

---

_[View the full topic](https://forum.inductiveautomation.com/t/snmp-ignition-module-snmp-v3-setup/111151)._