# \[SOLVED\] Is my Load Factor on a PLC connection(s) too high?

**URL:** <https://forum.inductiveautomation.com/t/solved-is-my-load-factor-on-a-plc-connection-s-too-high/48058>\
**Category:** Ignition\
**Created:** [June 22, 2021, 1:33pm UTC](https://forum.inductiveautomation.com/t/solved-is-my-load-factor-on-a-plc-connection-s-too-high/48058 "2021-06-22T13:33:59Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![jdehart](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jdehart/32/17840_2.png) [@jdehart](https://forum.inductiveautomation.com/u/jdehart)\
**Post date:** [June 22, 2021, 7:56pm UTC](https://forum.inductiveautomation.com/t/solved-is-my-load-factor-on-a-plc-connection-s-too-high/48058/18 "2021-06-22T19:56:49Z")

</div>

Might be worth inspecting the PLC’s and see how loaded they are. possibly not enough overhead time for the connections on the PLC? Not sure of brand or model obviously.

---

_[View the full topic](https://forum.inductiveautomation.com/t/solved-is-my-load-factor-on-a-plc-connection-s-too-high/48058)._