# Some Remotely Provided Tags Missing **URL:** \ **Category:** Ignition\ **Created:** [December 4, 2019, 4:11am UTC](https://forum.inductiveautomation.com/t/some-remotely-provided-tags-missing/30425 "2019-12-04T04:11:53Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![witman](https://avatars.discourse-cdn.com/v4/letter/w/d2c977/32.png) [@witman](https://forum.inductiveautomation.com/u/witman)\ **Post date:** [December 4, 2019, 6:30am UTC](https://forum.inductiveautomation.com/t/some-remotely-provided-tags-missing/30425/2 "2019-12-04T06:30:59Z")
It looks like you're using a 7.x.x version as well as version 8.0.6. > [@amirsalar.arya.kia](#): > > First issue is that some and only some tags don’t poll until I actually look at them in the tag browser. So on a component they don’t update or just says Uncertain\_initialValue. I'm sorry I don't have much help to offer on this, but it sounds somewhat like the issue I noted here: > [@BUG: Vision 7.9 fails to load 8.0 remote tags until 2nd Vision client opened](http://forum.inductiveautomation.com/t/bug-vision-7-9-fails-to-load-8-0-remote-tags-until-2nd-vision-client-opened/29016): > > We have a Vision project on a v7.9.9 server accessing tags from a 8.0.4 server via a remote tag provider. When we open the page accessing these remote tags in Designer, they all display as expected. When we open it in a Vision Client on the same computer as the Designer (or another computer), all of these tags have an unknown quality overlay like this: [image] If we leave the first client showing quality overlays as above open and then open a second client on the same computer and open this pa… This issue will _likely_ go away when we have both servers on version 8, though we haven't had a chance to confirm that. I have not see the issue where some tags don't show at all. --- _[View the full topic](https://forum.inductiveautomation.com/t/some-remotely-provided-tags-missing/30425)._