# SPC module not showing in component palette

**URL:** <https://forum.inductiveautomation.com/t/spc-module-not-showing-in-component-palette/43460>\
**Category:** Ignition\
**Created:** [February 16, 2021, 1:53pm UTC](https://forum.inductiveautomation.com/t/spc-module-not-showing-in-component-palette/43460 "2021-02-16T13:53:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![vikasl1](https://avatars.discourse-cdn.com/v4/letter/v/db5fbb/32.png) [@vikasl1](https://forum.inductiveautomation.com/u/vikasl1)\
**Post date:** [February 16, 2021, 1:53pm UTC](https://forum.inductiveautomation.com/t/spc-module-not-showing-in-component-palette/43460/1 "2021-02-16T13:53:57Z")

</div>

I have installed and Configured SPC Module in Gateway Module configuration and status is showing running.  
But in Designer launcher-\>component palette, SPC and Quality module not showing.  
Further information please find attachment.

---

<div class="post-metadata">

**Author:** ![schenk](https://avatars.discourse-cdn.com/v4/letter/s/6bbea6/32.png) [@schenk](https://forum.inductiveautomation.com/u/schenk)\
**Post date:** [February 16, 2021, 2:25pm UTC](https://forum.inductiveautomation.com/t/spc-module-not-showing-in-component-palette/43460/2 "2021-02-16T14:25:37Z")

</div>

Did you also install the production module? That’s a requirement for the SPC module and should be installed last.

See the [Additional Information](https://www.sepasoft.com/downloads/) at the bottom of the downloads page.

---

<div class="post-metadata">

**Author:** ![vikasl1](https://avatars.discourse-cdn.com/v4/letter/v/db5fbb/32.png) [@vikasl1](https://forum.inductiveautomation.com/u/vikasl1)\
**Post date:** [February 17, 2021, 8:01am UTC](https://forum.inductiveautomation.com/t/spc-module-not-showing-in-component-palette/43460/3 "2021-02-17T08:01:11Z")

</div>

Yes I have installed Production module first