# SPC Module

**URL:** <https://forum.inductiveautomation.com/t/spc-module/4320>\
**Category:** 3rd Party Modules\
**Created:** [April 19, 2012, 6:53pm UTC](https://forum.inductiveautomation.com/t/spc-module/4320 "2012-04-19T18:53:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jonathan](https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/32.png) [@Jonathan](https://forum.inductiveautomation.com/u/Jonathan)\
**Post date:** [April 19, 2012, 6:53pm UTC](https://forum.inductiveautomation.com/t/spc-module/4320/1 "2012-04-19T18:53:24Z")

</div>

Where can I download the SPC module? I would like to test it out.

Thank you,

---

<div class="post-metadata">

**Author:** ![thechtman](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@thechtman](https://forum.inductiveautomation.com/u/thechtman)\
**Post date:** [April 19, 2012, 8:37pm UTC](https://forum.inductiveautomation.com/t/spc-module/4320/2 "2012-04-19T20:37:46Z")

</div>

I’m being told it will be available for download from the website by noon tomorrow.

---

<div class="post-metadata">

**Author:** ![thechtman](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@thechtman](https://forum.inductiveautomation.com/u/thechtman)\
**Post date:** [April 20, 2012, 8:15pm UTC](https://forum.inductiveautomation.com/t/spc-module/4320/3 "2012-04-20T20:15:10Z")

</div>

The SPC release candidate is available for download from the beta section. Select 7.4 beta and it is in the MES Modules sections.

The manual is coming. In the mean time call into tech support and we can answer questions or give you quick overview so that you can get going.

Tom