# SPC- Sample Manager - Definitions

**URL:** <https://forum.inductiveautomation.com/t/spc-sample-manager-definitions/54848>\
**Category:** 3rd Party Modules\
**Tags:** ignition81, vision, scripting\
**Created:** [January 10, 2022, 8:27pm UTC](https://forum.inductiveautomation.com/t/spc-sample-manager-definitions/54848 "2022-01-10T20:27:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Felipe\_Ferreira](https://avatars.discourse-cdn.com/v4/letter/f/edb3f5/32.png) [@Felipe\_Ferreira](https://forum.inductiveautomation.com/u/Felipe_Ferreira)\
**Post date:** [January 10, 2022, 8:27pm UTC](https://forum.inductiveautomation.com/t/spc-sample-manager-definitions/54848/1 "2022-01-10T20:27:06Z")

</div>

How do I make new entries appear in the Definition list? New samples are being created in the definition list but are not listed in sample Manager. I always have to go back to the definition list to select the location.

---

<div class="post-metadata">

**Author:** ![jesse.records](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jesse.records/32/10960_2.png) [@jesse.records](https://forum.inductiveautomation.com/u/jesse.records)\
**Post date:** [January 11, 2022, 6:32pm UTC](https://forum.inductiveautomation.com/t/spc-sample-manager-definitions/54848/2 "2022-01-11T18:32:04Z")

</div>

If you are using SPC 2.0, I would recommend downloading the starter project file here: [SPC: Practical Tutorial - MES 2.0 Training Manual ver2 - Sepasoft MES Help Documentation](https://help.sepasoft.com/docs/display/TM2/SPC%3A+Practical+Tutorial)

Take a look at the Configuration Screen.

In SPC 3.0, this screen is collapsed into a single component: [SPC Sample Definition Manager - MES Platform 3.0 - Sepasoft MES Help Documentation](https://help.sepasoft.com/docs/display/SEPA/SPC+Sample+Definition+Manager)