# Specifying Monitors in Ignition

**URL:** <https://forum.inductiveautomation.com/t/specifying-monitors-in-ignition/10679>\
**Category:** Archived Topics\
**Created:** [October 27, 2015, 3:19pm UTC](https://forum.inductiveautomation.com/t/specifying-monitors-in-ignition/10679 "2015-10-27T15:19:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Trimax\_BRiley](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@Trimax\_BRiley](https://forum.inductiveautomation.com/u/Trimax_BRiley)\
**Post date:** [October 27, 2015, 3:19pm UTC](https://forum.inductiveautomation.com/t/specifying-monitors-in-ignition/10679/1 "2015-10-27T15:19:26Z")

</div>

Good morning,  
We are doing a project that will have a PC in one area with a number of remote monitors (in locations the PC is not). Is there a way to launch a Client at the local monitor and force it to be displayed on one of the remote monitors?

Thanks, and I hope my question makes sense…

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [October 27, 2015, 5:25pm UTC](https://forum.inductiveautomation.com/t/specifying-monitors-in-ignition/10679/2 "2015-10-27T17:25:36Z")

</div>

Hi!

You can specify which screen to launch to in the project properties. This would involve using something like an extended desktop.

 ![](https://us1.discourse-cdn.com/inductiveautomation/original/2X/5/5acfad010c4e77164be85d2ab90b1767f7dead40.png)