# Spinner Step Size Missing

**URL:** <https://forum.inductiveautomation.com/t/spinner-step-size-missing/95861>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [September 11, 2024, 4:19pm UTC](https://forum.inductiveautomation.com/t/spinner-step-size-missing/95861 "2024-09-11T16:19:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jordan\_Ward](https://avatars.discourse-cdn.com/v4/letter/j/a4c791/32.png) [@Jordan\_Ward](https://forum.inductiveautomation.com/u/Jordan_Ward)\
**Post date:** [September 11, 2024, 4:19pm UTC](https://forum.inductiveautomation.com/t/spinner-step-size-missing/95861/1 "2024-09-11T16:19:44Z")

</div>

Hi all,

New User (Credentialed but not Certified). I have a question within the Behavior of my Spinner Button. According to the manual the Step Size and few other properties should be observed but I am unable to locate them. See the pic below:

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/b/3b55b86740d07804e7ce1eca726e97cb34d9519b.png)

---

<div class="post-metadata">

**Author:** ![amarks](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/amarks/32/45610_2.png) [@amarks](https://forum.inductiveautomation.com/u/amarks)\
**Post date:** [September 11, 2024, 4:23pm UTC](https://forum.inductiveautomation.com/t/spinner-step-size-missing/95861/2 "2024-09-11T16:23:55Z")

</div>

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/5/c528d18a5fb1c592a58b1a8dcbc88975cbfa20cc.png)  
Filter is set to basic. Change to all