# SQL tag stops execution rate **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [December 4, 2024, 3:56pm UTC](https://forum.inductiveautomation.com/t/sql-tag-stops-execution-rate/99428 "2024-12-04T15:56:20Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![rfolkes](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@rfolkes](https://forum.inductiveautomation.com/u/rfolkes)\ **Post date:** [December 4, 2024, 3:56pm UTC](https://forum.inductiveautomation.com/t/sql-tag-stops-execution-rate/99428/1 "2024-12-04T15:56:20Z")
I have some SQL tags that appear to stop updating. execution rate is set to 1 min. There are times that I find it not updating at all. If I go into the tag and turn on the "green dot for UDT change" hit apply then turn it off and apply. It will start updating again. Any ideas of why it might be doing this and/or suggestions about keeping it consistently updating? ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/e/6e98f751510bfde5ab0850557172419bd5b68c90.png) ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [December 4, 2024, 3:57pm UTC](https://forum.inductiveautomation.com/t/sql-tag-stops-execution-rate/99428/2 "2024-12-04T15:57:51Z")
Get a thread dump next time you think one should have executed but hasn't. > **[Diagnostics - Threads | Ignition User Manual](https://docs.inductiveautomation.com/docs/8.1/platform/gateway/status/diagnostics-threads#individual-threads)** > > The Threads page displays a snapshot of information about Gateway’s execution threads. This information may be important when troubleshooting certain types of issues. If you are working with Support, you may be asked for a thread dump.