# Staging/Publishing

**URL:** <https://forum.inductiveautomation.com/t/staging-publishing/5756>\
**Category:** Ignition\
**Created:** [January 29, 2013, 11:54am UTC](https://forum.inductiveautomation.com/t/staging-publishing/5756 "2013-01-29T11:54:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zxcslo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/zxcslo/32/61610_2.png) [@zxcslo](https://forum.inductiveautomation.com/u/zxcslo)\
**Post date:** [January 29, 2013, 11:54am UTC](https://forum.inductiveautomation.com/t/staging-publishing/5756/1 "2013-01-29T11:54:10Z")

</div>

Hello.

I’m trying the Ignition. I have last trial version, 7.5.5 and on server (gateway) I have last java v6 (because I wanted to try mobile client).

My test project is set to manual publishing in project settings and update mode in Client settings is on push.  
I run two clients, one in staging (F9) mode and one in published (F10) mode.  
When I made a change in the designer and only save the project, both client windows are updated/refreshed, but the change is seen only on staging client.  
When I publish the project, then the change is also seen on the publishing client.

What I mean is, why is publishing client also refresh (or show the notification update bar, if in client setting the update mode is set to notify), if I only save the project? Shouldn’t only the staging client refresh and update?

I’m new at this, so be gentle, please … 😉

Regards from sLOVEnia, Europe

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [January 29, 2013, 4:09pm UTC](https://forum.inductiveautomation.com/t/staging-publishing/5756/2 "2013-01-29T16:09:50Z")

</div>

Try closing both of the clients and clearing out Ignition’s cache by deleting the .ignition folder in:

c:\users\username.ignition

Once you do that try launching the clients again to see if it acts the same way. It might be a cache problem.

---

<div class="post-metadata">

**Author:** ![zxcslo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/zxcslo/32/61610_2.png) [@zxcslo](https://forum.inductiveautomation.com/u/zxcslo)\
**Post date:** [January 29, 2013, 8:34pm UTC](https://forum.inductiveautomation.com/t/staging-publishing/5756/3 "2013-01-29T20:34:55Z")

</div>

That was it.

I cleared the cache and now only staging client update, when I press save project.  
When I press publish, only the publishing client updates.

Thank you.

Regards