# Stratix Switch Integration **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [March 31, 2021, 7:57pm UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139 "2021-03-31T19:57:03Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Dillon.lee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dillon.lee/32/23967_2.png) [@Dillon.lee](https://forum.inductiveautomation.com/u/Dillon.lee)\ **Post date:** [March 31, 2021, 7:57pm UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139/1 "2021-03-31T19:57:03Z")
My skids are running Stratix 5700 and will be moving to the Stratix 5800 shortly, however for now we can ingest them as a native device into the device tree on our Compactlogix, and I was wondering if anyone has had any luck just bringing them straight into igintion? I only ask this because we are looking at creating some network status screens and could potentially show issues on these said displays. ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [March 31, 2021, 8:01pm UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139/2 "2021-03-31T20:01:26Z")
I haven’t used either, but they’re just Ethernet/IP slaves. So my module can scan them: [https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-ethernetip-class-1-communications](https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-ethernetip-class-1-communications) ---
**Author:** ![Dillon.lee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dillon.lee/32/23967_2.png) [@Dillon.lee](https://forum.inductiveautomation.com/u/Dillon.lee)\ **Post date:** [March 31, 2021, 8:06pm UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139/3 "2021-03-31T20:06:14Z")
Does this work for 8.1? ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [March 31, 2021, 8:38pm UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139/4 "2021-03-31T20:38:33Z")
Yes. Click through the "Buy" button (which really isn't). Also: > [@Automation Professionals' v8.1 Module Updates](http://forum.inductiveautomation.com/t/automation-professionals-v8-1-module-updates/40804): > > Most of my v8 modules (appear to) work unmodified in v8.1. But changes to the OPC/UA stack broke my two drivers, which have now been updated: [Ethernet/IP Class 1 Communications](https://www.automation-pros.com/ignition/Image%20and%20Video%20Streaming%20Driver-0.5.0.2011191454-v81.modl)[Image and Video Streamer](https://www.automation-pros.com/ignition/Image%20and%20Video%20Streaming%20Driver-0.5.0.2011191454-v81.modl) This list will be updated as needed for my other modules. ---
**Author:** ![Kyan\_R\_P](https://avatars.discourse-cdn.com/v4/letter/k/ed655f/32.png) [@Kyan\_R\_P](https://forum.inductiveautomation.com/u/Kyan_R_P)\ **Post date:** [January 30, 2025, 1:11am UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139/5 "2025-01-30T01:11:26Z")
Hello, I'm fairly new to this. And I read through some of your documentation, however most of it just goes over my head. I am trying to get port status information etc. from a stratix 5700 switch similar to Dillon and I was wondering if you could please point me in the right direction? ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [January 30, 2025, 1:49am UTC](https://forum.inductiveautomation.com/t/stratix-switch-integration/45139/6 "2025-01-30T01:49:22Z")
I don't have one of these, but if I did, I would scan it with my module as if it was a I/O device. It is not simple to configure, but I have detailed instructions for interpreting EDS files in my User Manual. (EtherNet/IP Class1 Communications suite 3rd party module.) If you have Studio5000, it may be simpler to create a sample L8x project that just has a generic ethernet module in the I/O tree, with the necessary data types. Export as L5X then import into my driver. That will get very close.