# Styling problems for "Docked Window"

**URL:** <https://forum.inductiveautomation.com/t/styling-problems-for-docked-window/35579>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [June 12, 2020, 3:05am UTC](https://forum.inductiveautomation.com/t/styling-problems-for-docked-window/35579 "2020-06-12T03:05:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![m15195757181](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@m15195757181](https://forum.inductiveautomation.com/u/m15195757181)\
**Post date:** [June 12, 2020, 3:05am UTC](https://forum.inductiveautomation.com/t/styling-problems-for-docked-window/35579/1 "2020-06-12T03:05:09Z")

</div>

As shown in the first figure, the red arrow area is red and white two “Docked Window”, now is red Window blocking the lateral extension of white Window, I want to by some Settings make Bai Seyan "at both ends to the Window, such as the effect of the second picture, I tried many ways, but don’t work, could you tell me the correct solution, thank you.

 ![1591930582(1)](https://us1.discourse-cdn.com/inductiveautomation/original/2X/d/d2c67ede5477dee3c85ecc8f5be8568fa215eae0.png) ![1591930717(1)](https://us1.discourse-cdn.com/inductiveautomation/original/2X/b/b54c03b866a27683a14c0ce5778259c2505a49e5.png)

---

<div class="post-metadata">

**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\
**Post date:** [June 12, 2020, 4:37pm UTC](https://forum.inductiveautomation.com/t/styling-problems-for-docked-window/35579/2 "2020-06-12T16:37:05Z")

</div>

In the designer, Project Properties -\> Vision -\> User Interface, set the ‘Axis Precedence’ to North/South:  
[https://docs.inductiveautomation.com/display/DOC80/Vision+Project+Properties#VisionProjectProperties-VisionUserInterfaceProperties](https://docs.inductiveautomation.com/display/DOC80/Vision+Project+Properties#VisionProjectProperties-VisionUserInterfaceProperties)