# Suggestions about recreating the ability to adjust date by days, hours, minutes

**URL:** <https://forum.inductiveautomation.com/t/suggestions-about-recreating-the-ability-to-adjust-date-by-days-hours-minutes/50735>\
**Category:** Ignition\
**Created:** [September 8, 2021, 6:54pm UTC](https://forum.inductiveautomation.com/t/suggestions-about-recreating-the-ability-to-adjust-date-by-days-hours-minutes/50735 "2021-09-08T18:54:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dzohner](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@dzohner](https://forum.inductiveautomation.com/u/dzohner)\
**Post date:** [September 8, 2021, 6:54pm UTC](https://forum.inductiveautomation.com/t/suggestions-about-recreating-the-ability-to-adjust-date-by-days-hours-minutes/50735/1 "2021-09-08T18:54:37Z")

</div>

I’m looking to recreate the attached picture functionality but not in the power table. I want to use a spinner to increment by whole numbers. I want the user to be able to select days, hours, minutes. I need to be able to write it back to a date format such as seen in the picture. I’m getting stuck between the integer format of the spinner and using that to control incrementing the date whether by day, hour, or minute.

Any ideas or suggestions is appreciated.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/f/0f003f383544c97b0b3e570910cf6b236fbf6921.png)

---

<div class="post-metadata">

**Author:** ![dzohner](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@dzohner](https://forum.inductiveautomation.com/u/dzohner)\
**Post date:** [September 8, 2021, 8:09pm UTC](https://forum.inductiveautomation.com/t/suggestions-about-recreating-the-ability-to-adjust-date-by-days-hours-minutes/50735/2 "2021-09-08T20:09:05Z")

</div>

Found solution will update with solution soon