# Supress repeat instances of shelved alarm

**URL:** <https://forum.inductiveautomation.com/t/supress-repeat-instances-of-shelved-alarm/63754>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [September 5, 2022, 6:30am UTC](https://forum.inductiveautomation.com/t/supress-repeat-instances-of-shelved-alarm/63754 "2022-09-05T06:30:44Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Douglas\_Lawrie](https://avatars.discourse-cdn.com/v4/letter/d/a87d85/32.png) [@Douglas\_Lawrie](https://forum.inductiveautomation.com/u/Douglas_Lawrie)\
**Post date:** [September 25, 2023, 3:12am UTC](https://forum.inductiveautomation.com/t/supress-repeat-instances-of-shelved-alarm/63754/6 "2023-09-25T03:12:58Z")

</div>

Created this bug report 🙂

> [@\[Bug\] Cannot shelve alarms from a remote tag provider with capital letters in the name](https://forum.inductiveautomation.com/t/bug-cannot-shelve-alarms-from-a-remote-tag-provider-with-capital-letters-in-the-name/79563):
>
> Unexpected behaviour When shelving an alarm from a perspective alarm status table, the alarm entry moves from the Active tab to the Shelved tab, but when the alarm retriggers, new instances appear in the active tab. Expected behaviour Shelved alarms do not show as Active until the shelving time elapses. Other details This only occurs in our hub/spoke gateway architecture, where perspective clients are connected to the hub gateway and alarms are coming via remote tag providers from the spok…

---

_[View the full topic](https://forum.inductiveautomation.com/t/supress-repeat-instances-of-shelved-alarm/63754)._