# system.alarm.queryStatus broken in 7.9.5?

**URL:** <https://forum.inductiveautomation.com/t/system-alarm-querystatus-broken-in-7-9-5/16279>\
**Category:** Ignition\
**Tags:** ignition79\
**Created:** [December 11, 2017, 8:20am UTC](https://forum.inductiveautomation.com/t/system-alarm-querystatus-broken-in-7-9-5/16279 "2017-12-11T08:20:33Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![mazeyrat](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mazeyrat/32/10955_2.png) [@mazeyrat](https://forum.inductiveautomation.com/u/mazeyrat)\
**Post date:** [December 11, 2017, 12:37pm UTC](https://forum.inductiveautomation.com/t/system-alarm-querystatus-broken-in-7-9-5/16279/2 "2017-12-11T12:37:25Z")

</div>

This is a known issue which will be fixed in 7.9.6 according this post :

> [@7.9.5 Alarm Source Filter Wildcard Not Working](http://forum.inductiveautomation.com/t/7-9-5-alarm-source-filter-wildcard-not-working/16055):
>
> Hey all, I’m having an issue with a wildcard (\*) filter not working in the source filter of my Alarm Status Table, and not working in the Path of a system.alarm.queryStatus script. Incidentally the issue is NOT affecting my Alarm Journal Table. Similar to what was 1st reported [here](http://forum.inductiveautomation.com/t/7-6-alarm-journal-source-filter-wildcard-not-working/6467) except this is a 7.9.5 install. When trying to use the filter \*Main Plant\* alarms that should be shown are not. Definitely not the goal I’m after!

---

_[View the full topic](https://forum.inductiveautomation.com/t/system-alarm-querystatus-broken-in-7-9-5/16279)._