# system.net.httpClient

**URL:** <https://forum.inductiveautomation.com/t/system-net-httpclient/81223>\
**Category:** Ignition\
**Tags:** ignition81, perspective, scripting\
**Created:** [October 31, 2023, 10:44am UTC](https://forum.inductiveautomation.com/t/system-net-httpclient/81223 "2023-10-31T10:44:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rickard\_Nordwall](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@Rickard\_Nordwall](https://forum.inductiveautomation.com/u/Rickard_Nordwall)\
**Post date:** [October 31, 2023, 10:44am UTC](https://forum.inductiveautomation.com/t/system-net-httpclient/81223/1 "2023-10-31T10:44:38Z")

</div>

Hi,

Does the function system.net.httpClient() support [headerValues] as system.net.httpGet() does?  
The API I'm using demands that authentication is done via a dictionary in [headerValues] .

Thanks,  
Rickard

---

<div class="post-metadata">

**Author:** ![deon.korb](https://avatars.discourse-cdn.com/v4/letter/d/8c91f0/32.png) [@deon.korb](https://forum.inductiveautomation.com/u/deon.korb)\
**Post date:** [October 31, 2023, 10:52am UTC](https://forum.inductiveautomation.com/t/system-net-httpclient/81223/2 "2023-10-31T10:52:00Z")

</div>

Headers are mentioned as parameters in the JythonHttpClient section:  
[https://docs.inductiveautomation.com/display/DOC81/system.net.httpClient](https://docs.inductiveautomation.com/display/DOC81/system.net.httpClient)

---

<div class="post-metadata">

**Author:** ![Rickard\_Nordwall](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@Rickard\_Nordwall](https://forum.inductiveautomation.com/u/Rickard_Nordwall)\
**Post date:** [October 31, 2023, 12:48pm UTC](https://forum.inductiveautomation.com/t/system-net-httpclient/81223/3 "2023-10-31T12:48:18Z")

</div>

Yes, you are correct!  
I'm a bit of a novice, I post the syntax if anybody else faces the same issue;

#API authorization`  
dictionary = {  
"Authorization": "Bearer " + token,  
}  
client = system.net.httpClient()  
response = client.get(url=urlEndPoint,headers=dictionary)