# Tab strip making just one pulse in the selected tab

**URL:** <https://forum.inductiveautomation.com/t/tab-strip-making-just-one-pulse-in-the-selected-tab/79585>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [September 25, 2023, 2:12pm UTC](https://forum.inductiveautomation.com/t/tab-strip-making-just-one-pulse-in-the-selected-tab/79585 "2023-09-25T14:12:51Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![justinedwards.jle](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/justinedwards.jle/32/37854_2.png) [@justinedwards.jle](https://forum.inductiveautomation.com/u/justinedwards.jle)\
**Post date:** [October 3, 2023, 9:08pm UTC](https://forum.inductiveautomation.com/t/tab-strip-making-just-one-pulse-in-the-selected-tab/79585/8 "2023-10-03T21:08:46Z")

</div>

This post I read today seems relevant to what you are wanting to do:

> [@Docked Tab Strip for Navigation with Contextual Go-To Buttons](https://forum.inductiveautomation.com/t/docked-tab-strip-for-navigation-with-contextual-go-to-buttons/79995/2):
>
> Most people bind the tag strip to the current window system tag. As long as all of your main window operations use swapping instead of opening, it should stay in sync. (I can't remember when they went missing, but there were many Vision project templates available that showed how one would typically tie stuff together. Consider spinning up a v7.9 or v8.0 gateway to recover samples of those.)

---

_[View the full topic](https://forum.inductiveautomation.com/t/tab-strip-making-just-one-pulse-in-the-selected-tab/79585)._