# Table data filtering

**URL:** <https://forum.inductiveautomation.com/t/table-data-filtering/102259>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [February 12, 2025, 5:37pm UTC](https://forum.inductiveautomation.com/t/table-data-filtering/102259 "2025-02-12T17:37:27Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Felipe\_Cordova](https://avatars.discourse-cdn.com/v4/letter/f/71e660/32.png) [@Felipe\_Cordova](https://forum.inductiveautomation.com/u/Felipe_Cordova)\
**Post date:** [February 12, 2025, 5:37pm UTC](https://forum.inductiveautomation.com/t/table-data-filtering/102259/1 "2025-02-12T17:37:27Z")

</div>

I have a question.

I am in perspective with my component of the table, I create a diunamic filter, so that it is filtered by columns, what happens is that I have another label where I want to obtain the total of the data in the table, before I had it this way.

```python
len({.../flex_tabla/tbl_listado.props.data})

```

But that remains static, I found another way that is to activate in the filter property, the results, and it creates me another dataset, with the filtered data, the problem is that if I have a table with 2000 data, and I look for example all that I can find with the letter a, I would be with a dataset of 2000 data plus one similar loading in results. which is a very big load for the page, is there another way to obtain that amount of filtered data, without having to activate the results?

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/6/1/611fef5aff5e3d8e6ebb352c829d405dc069c7ff.png)