# Table filter 'results' property

**URL:** <https://forum.inductiveautomation.com/t/table-filter-results-property/64278>\
**Category:** Ignition\
**Tags:** ignition81, perspective\
**Created:** [September 20, 2022, 1:16pm UTC](https://forum.inductiveautomation.com/t/table-filter-results-property/64278 "2022-09-20T13:16:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mjohnson0238](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@mjohnson0238](https://forum.inductiveautomation.com/u/mjohnson0238)\
**Post date:** [September 20, 2022, 1:16pm UTC](https://forum.inductiveautomation.com/t/table-filter-results-property/64278/1 "2022-09-20T13:16:52Z")

</div>

Is tere a property for this? The ‘results’  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/1/c17a3505c4b8b84fbeace5d98d00ad155adf7cb9.png)  
I would like to bind that to a status bar like this:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/9/0958d83b265e95ae3d15608a6ba4b4ba8170432d.png)  
Currently it shows the full table listing, I would like to bind the 300 to the filter results which would be 69 in this case.

Thanks

---

<div class="post-metadata">

**Author:** ![lrose](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lrose/32/62724_2.png) [@lrose](https://forum.inductiveautomation.com/u/lrose)\
**Post date:** [September 20, 2022, 1:27pm UTC](https://forum.inductiveautomation.com/t/table-filter-results-property/64278/2 "2022-09-20T13:27:47Z")

</div>

Add an expression binding:

```auto
len({../Table.props.filter.results.data})

```

Your path will most likely be different, use the property selector to get the correct path.

---

<div class="post-metadata">

**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\
**Post date:** [September 20, 2022, 1:28pm UTC](https://forum.inductiveautomation.com/t/table-filter-results-property/64278/3 "2022-09-20T13:28:09Z")

</div>

Your question is a little unclear but I think you are asking how to get the number of results returned by the Perspective table component’s filter function. Try this:

- `props.filter.enabled : true`.
- `props.filter.results.enabled : true`.
- You can then get the number of results using an expression binding to somthing like  
`len({this.props.filter.results.data})`.