# Table Group in Reporting

**URL:** <https://forum.inductiveautomation.com/t/table-group-in-reporting/57351>\
**Category:** Ignition\
**Created:** [March 18, 2022, 7:01am UTC](https://forum.inductiveautomation.com/t/table-group-in-reporting/57351 "2022-03-18T07:01:29Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![prasath.t](https://avatars.discourse-cdn.com/v4/letter/p/898d66/32.png) [@prasath.t](https://forum.inductiveautomation.com/u/prasath.t)\
**Post date:** [March 18, 2022, 7:01am UTC](https://forum.inductiveautomation.com/t/table-group-in-reporting/57351/1 "2022-03-18T07:01:29Z")

</div>

Hi I am using peer table group in reports

 ![Table group](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/d/0d74fdc5ae357ec068ef4664ca71c1e2968d45c3.png)

**I want to give some space between the 2 tables** ( right now its touching each other)  
Is there are any way give some separation between the tables?

I tired to figure but i couldn’t able to find solution please any one help me out

---

<div class="post-metadata">

**Author:** ![josborn](https://avatars.discourse-cdn.com/v4/letter/j/4bbf92/32.png) [@josborn](https://forum.inductiveautomation.com/u/josborn)\
**Post date:** [March 18, 2022, 5:52pm UTC](https://forum.inductiveautomation.com/t/table-group-in-reporting/57351/2 "2022-03-18T17:52:53Z")

</div>

Show us your table config in the design tab.

---

<div class="post-metadata">

**Author:** ![prasath.t](https://avatars.discourse-cdn.com/v4/letter/p/898d66/32.png) [@prasath.t](https://forum.inductiveautomation.com/u/prasath.t)\
**Post date:** [March 18, 2022, 5:57pm UTC](https://forum.inductiveautomation.com/t/table-group-in-reporting/57351/3 "2022-03-18T17:57:55Z")

</div>

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/7/9/7910f0fc8aaecc649ec716ff444d26b042869538.png)

---

<div class="post-metadata">

**Author:** ![josborn](https://avatars.discourse-cdn.com/v4/letter/j/4bbf92/32.png) [@josborn](https://forum.inductiveautomation.com/u/josborn)\
**Post date:** [March 18, 2022, 6:03pm UTC](https://forum.inductiveautomation.com/t/table-group-in-reporting/57351/4 "2022-03-18T18:03:02Z")

</div>

From the manual:

> Peer Table Groups allow the second table to begin exactly where the first table ends.

I think you would need to fake it by adding a blank header or footer or use the start on new page option.

---

<div class="post-metadata">

**Author:** ![prasath.t](https://avatars.discourse-cdn.com/v4/letter/p/898d66/32.png) [@prasath.t](https://forum.inductiveautomation.com/u/prasath.t)\
**Post date:** [March 18, 2022, 6:03pm UTC](https://forum.inductiveautomation.com/t/table-group-in-reporting/57351/5 "2022-03-18T18:03:56Z")

</div>

yaa thanks i will try to fix it out