# Tag Alarm: Active Delay on Any Change condition

**URL:** <https://forum.inductiveautomation.com/t/tag-alarm-active-delay-on-any-change-condition/21504>\
**Category:** Ignition\
**Created:** [December 19, 2018, 4:56pm UTC](https://forum.inductiveautomation.com/t/tag-alarm-active-delay-on-any-change-condition/21504 "2018-12-19T16:56:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rliem](https://avatars.discourse-cdn.com/v4/letter/r/a4c791/32.png) [@rliem](https://forum.inductiveautomation.com/u/rliem)\
**Post date:** [December 19, 2018, 4:56pm UTC](https://forum.inductiveautomation.com/t/tag-alarm-active-delay-on-any-change-condition/21504/1 "2018-12-19T16:56:09Z")

</div>

Hi, I’m setting up an alarm for a parameter change, so I’m using “Any Change” mode. Is there a way to use Active Delay to ignore the alarm when the value changes for a second and then returns to the previous value? I believe the Active Delay currently works on other modes except for the “Any Change” mode

---

<div class="post-metadata">

**Author:** ![chaoliang](https://avatars.discourse-cdn.com/v4/letter/c/ba8739/32.png) [@chaoliang](https://forum.inductiveautomation.com/u/chaoliang)\
**Post date:** [January 2, 2024, 11:15am UTC](https://forum.inductiveautomation.com/t/tag-alarm-active-delay-on-any-change-condition/21504/2 "2024-01-02T11:15:26Z")

</div>

I am having the same situation, not sure whether you already got the right answer.