# Tag Quality Help

**URL:** <https://forum.inductiveautomation.com/t/tag-quality-help/95823>\
**Category:** Ignition\
**Tags:** perspective\
**Created:** [September 11, 2024, 4:05am UTC](https://forum.inductiveautomation.com/t/tag-quality-help/95823 "2024-09-11T04:05:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jasmine\_Quick](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jasmine_quick/32/80380_2.png) [@Jasmine\_Quick](https://forum.inductiveautomation.com/u/Jasmine_Quick)\
**Post date:** [September 11, 2024, 4:05am UTC](https://forum.inductiveautomation.com/t/tag-quality-help/95823/1 "2024-09-11T04:05:39Z")

</div>

Hi!

I have some OPC tags connected to an Allen Bradley device using the CompactLogix Legacy driver, and some tags work, but other tags (especially booleans) give me an error code Error\_Configuration("Bad\_AttributeIdInvalid: The attribute is not supported for the specific node.")

I've confirmed the tags exist and there aren't any typos, and don't appear to be any special R/W config on the PLC end.

I tried referencing this webpage:  
[Quality Codes and Overlays | Ignition User Manual](https://www.docs.inductiveautomation.com/docs/8.1/platform/tags/quality-codes-and-overlays) but that doesn't cover this specific error.

Any advice would be appreciated 🙂

EDIT: I found it, my OPC Item Path was missing the Global.{tag name} after the device driver