# Tags problems in Ignition Designer 7.2.2 **URL:** \ **Category:** Ignition\ **Created:** [February 12, 2011, 11:05pm UTC](https://forum.inductiveautomation.com/t/tags-problems-in-ignition-designer-7-2-2/2635 "2011-02-12T23:05:55Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Pulsar2003](https://avatars.discourse-cdn.com/v4/letter/p/ecb155/32.png) [@Pulsar2003](https://forum.inductiveautomation.com/u/Pulsar2003)\ **Post date:** [February 12, 2011, 11:05pm UTC](https://forum.inductiveautomation.com/t/tags-problems-in-ignition-designer-7-2-2/2635/1 "2011-02-12T23:05:55Z")
Hello, I’m at my first attempts in designing a project. For this I’m using a MicroLogix1100 through the Ethernet port. The set up works fine. I brought up all the files (B3,T4,C5,R6,N7,F8,C9) and once opened up I can see the values change. From that I know I’m fine. Once I’ve finish a Window I noticed that two tags had the flag in the upper left corner and the item was also blurred; the indication that there is a problem with the tag. This was only on two tags. The quality of the tags are set at 500. At first I thought it was because RSLogix was also running on the Ethernet driver and that could have been too much for the ML1100. I had other things to do so I shut everything off, later I tried it again (RSLogix is not running) to my surprise there were more tags faulted. I added a print screen picture so it can be seen. When you will read: “Poste” that means station or work bench. Basically the large digit give the count of how many parts were assembled on that station. On the upper corner there a three sequances of number which is the accumulated time for the part currently being assembled ( 0:00:00), that’s for hours, minutes, and seconds. The data is collected from counter in the C9 files. On this one page there is a total of 36 tags. Is that too much for one page? The first time this happened it was on the hour digit of Station 3 and 7. Station 7 hour digit is now fine it’s the accumulated value that is now with the defective tag. Try to understand that. 😃 (I will try too download the file later, I get a refusal for the type of file, yet I posted a few here with the \*.png extension from MS Paint.) Thank you. ![](https://us1.discourse-cdn.com/inductiveautomation/original/1X/df1a3fb7026e691db5d27a8361269e2d33d7e15c.jpg) ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [February 13, 2011, 3:03am UTC](https://forum.inductiveautomation.com/t/tags-problems-in-ignition-designer-7-2-2/2635/2 "2011-02-13T03:03:28Z")
What version are you running? Let’s make sure you’re at 7.2.3 ([download here](https://inductiveautomation.com/downloads)) and then we can start trouble shooting from there. ---
**Author:** ![Pulsar2003](https://avatars.discourse-cdn.com/v4/letter/p/ecb155/32.png) [@Pulsar2003](https://forum.inductiveautomation.com/u/Pulsar2003)\ **Post date:** [February 13, 2011, 1:51pm UTC](https://forum.inductiveautomation.com/t/tags-problems-in-ignition-designer-7-2-2/2635/3 "2011-02-13T13:51:28Z")
I had the version 7.2.2. Uploaded about two weeks ago. I made the new installation and the problem seems to be solved. Thank you. ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [February 13, 2011, 7:48pm UTC](https://forum.inductiveautomation.com/t/tags-problems-in-ignition-designer-7-2-2/2635/4 "2011-02-13T19:48:11Z")
I suspected as much. There was a bug in 7.2.2 that could cause behavior like this. Anybody else having issues with tags keeping good qualities while using our OPC-UA drivers should upgrade and see if it’s fixed. ---
**Author:** ![Pulsar2003](https://avatars.discourse-cdn.com/v4/letter/p/ecb155/32.png) [@Pulsar2003](https://forum.inductiveautomation.com/u/Pulsar2003)\ **Post date:** [February 13, 2011, 8:54pm UTC](https://forum.inductiveautomation.com/t/tags-problems-in-ignition-designer-7-2-2/2635/5 "2011-02-13T20:54:51Z")
I’m glad to see that it was not something I did wrong or that I had issues with my PLC or software. Also I hope that the title of the post will be clear for those who will look up for the information. Thank you Kevin.