# Take Display Path from Alarm Status Table

**URL:** <https://forum.inductiveautomation.com/t/take-display-path-from-alarm-status-table/9233>\
**Category:** Ignition\
**Created:** [October 27, 2014, 12:07pm UTC](https://forum.inductiveautomation.com/t/take-display-path-from-alarm-status-table/9233 "2014-10-27T12:07:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Serhii](https://avatars.discourse-cdn.com/v4/letter/s/df788c/32.png) [@Serhii](https://forum.inductiveautomation.com/u/Serhii)\
**Post date:** [October 27, 2014, 12:07pm UTC](https://forum.inductiveautomation.com/t/take-display-path-from-alarm-status-table/9233/1 "2014-10-27T12:07:11Z")

</div>

Hello! In Ignition 7.7.1 how i can get the Display Path from Alarm Status Table ot another columns if this table dont have property “data”?

Next, i must to get Display Path from selected alarm and write the “4” to tag of this alarm using Acknowlegment. How i can do this?

In Dataset “Selected alarms” column DIsplayPath empty ![:scratch:](https://us1.discourse-cdn.com/inductiveautomation/original/1X/76d1620bec252bfac07050c889ff5a91dc8a9c25.gif ":scratch:")  
[screenshot.su/show.php?img=d5151 … f2aa64.jpg](http://screenshot.su/show.php?img=d5151b0c47416121361ec3ad23f2aa64.jpg)

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [October 30, 2014, 4:41pm UTC](https://forum.inductiveautomation.com/t/take-display-path-from-alarm-status-table/9233/2 "2014-10-30T16:41:16Z")

</div>

This component does not have a data property, that is correct. You could query the alarm\_events table to get the information you are looking for. This may be a little bit tricky though. You could use the system.alarm.queryStatus function to return this information. This may be the better way to go.

[support.inductiveautomation.com … status.htm](https://support.inductiveautomation.com/usermanuals/ignition/system_alarm_querystatus.htm)

To write a specific value to the tag when it is acknowledged you could try using a “Alarm Acknowledged” Event Script.

The Display Path column is most likely empty because you do not have the display path property configured in the alarm on the tag. If the display path property is left empty it will not display anything.