# TASE.2 IEC 60870-6-503 protocol support by Ignition

**URL:** <https://forum.inductiveautomation.com/t/tase-2-iec-60870-6-503-protocol-support-by-ignition/96533>\
**Category:** General Discussion\
**Created:** [September 27, 2024, 7:41am UTC](https://forum.inductiveautomation.com/t/tase-2-iec-60870-6-503-protocol-support-by-ignition/96533 "2024-09-27T07:41:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jaan\_Vool](https://avatars.discourse-cdn.com/v4/letter/j/b19c9b/32.png) [@Jaan\_Vool](https://forum.inductiveautomation.com/u/Jaan_Vool)\
**Post date:** [September 27, 2024, 7:41am UTC](https://forum.inductiveautomation.com/t/tase-2-iec-60870-6-503-protocol-support-by-ignition/96533/1 "2024-09-27T07:41:34Z")

</div>

Hi,

have to build communication with another SCADA using TASE.2 IEC 60870-6-503 protocol. Does Ignition support TASE.2?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [September 27, 2024, 10:29am UTC](https://forum.inductiveautomation.com/t/tase-2-iec-60870-6-503-protocol-support-by-ignition/96533/2 "2024-09-27T10:29:00Z")

</div>

No, it doesn't.

You would need to use a third party OPC server like [this](https://www.trianglemicroworks.com/products/scada-data-gateway) that has support for it.

---

<div class="post-metadata">

**Author:** ![Jaan\_Vool](https://avatars.discourse-cdn.com/v4/letter/j/b19c9b/32.png) [@Jaan\_Vool](https://forum.inductiveautomation.com/u/Jaan_Vool)\
**Post date:** [September 27, 2024, 11:27am UTC](https://forum.inductiveautomation.com/t/tase-2-iec-60870-6-503-protocol-support-by-ignition/96533/3 "2024-09-27T11:27:50Z")

</div>

All clear, thank you!