# TCP Binary Driver - Ignition \> 7.5.0

**URL:** <https://forum.inductiveautomation.com/t/tcp-binary-driver-ignition-7-5-0/6870>\
**Category:** 3rd Party Modules\
**Created:** [July 16, 2013, 6:22am UTC](https://forum.inductiveautomation.com/t/tcp-binary-driver-ignition-7-5-0/6870 "2013-07-16T06:22:37Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mayon](https://avatars.discourse-cdn.com/v4/letter/m/a3d4f5/32.png) [@Mayon](https://forum.inductiveautomation.com/u/Mayon)\
**Post date:** [July 16, 2013, 6:22am UTC](https://forum.inductiveautomation.com/t/tcp-binary-driver-ignition-7-5-0/6870/1 "2013-07-16T06:22:37Z")

</div>

Hello

I hope anyone can help me. While trying to instlal the TCP Binary Driver it can’t start. Its state is faulted by saying the API Version does not match.

My running Ignition version is 7.6.2.

Is it possible to get this mudule run under this version.  
Or would it also be possible to get the source code of this free module?

Thanks a lot!

---

<div class="post-metadata">

**Author:** ![chi](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@chi](https://forum.inductiveautomation.com/u/chi)\
**Post date:** [July 16, 2013, 6:31am UTC](https://forum.inductiveautomation.com/t/tcp-binary-driver-ignition-7-5-0/6870/2 "2013-07-16T06:31:57Z")

</div>

I will upload the updated version some time soon, only have to do some final test.

---

<div class="post-metadata">

**Author:** ![Mayon](https://avatars.discourse-cdn.com/v4/letter/m/a3d4f5/32.png) [@Mayon](https://forum.inductiveautomation.com/u/Mayon)\
**Post date:** [July 16, 2013, 6:42am UTC](https://forum.inductiveautomation.com/t/tcp-binary-driver-ignition-7-5-0/6870/3 "2013-07-16T06:42:01Z")

</div>

Thanks a lot for this quick reply 🙂

---

<div class="post-metadata">

**Author:** ![chi](https://avatars.discourse-cdn.com/v4/letter/c/0ea827/32.png) [@chi](https://forum.inductiveautomation.com/u/chi)\
**Post date:** [July 21, 2013, 2:35pm UTC](https://forum.inductiveautomation.com/t/tcp-binary-driver-ignition-7-5-0/6870/4 "2013-07-21T14:35:21Z")

</div>

1.6.0 is now online. Let me know if there are any problems.

---

<div class="post-metadata">

**Author:** ![zxcslo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/zxcslo/32/61610_2.png) [@zxcslo](https://forum.inductiveautomation.com/u/zxcslo)\
**Post date:** [August 1, 2013, 8:06am UTC](https://forum.inductiveautomation.com/t/tcp-binary-driver-ignition-7-5-0/6870/5 "2013-08-01T08:06:23Z")

</div>

I have tried this module and I must say it works very good with Siemens S7 PLC.