# Template (2 concentric circles)

**URL:** <https://forum.inductiveautomation.com/t/template-2-concentric-circles/60185>\
**Category:** Ignition\
**Tags:** ignition81, vision\
**Created:** [May 30, 2022, 5:52pm UTC](https://forum.inductiveautomation.com/t/template-2-concentric-circles/60185 "2022-05-30T17:52:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alberto\_AG](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@Alberto\_AG](https://forum.inductiveautomation.com/u/Alberto_AG)\
**Post date:** [May 30, 2022, 5:52pm UTC](https://forum.inductiveautomation.com/t/template-2-concentric-circles/60185/1 "2022-05-30T17:52:59Z")

</div>

Good afternoon.

In Vision I have created a **template** made up of 2 concentric circles:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/0/f/0feb9b9d0be79a5ace29aa129ee540d4ec30c400.png)

Is it possible that even if the size of the template is changed, the **small circle always stays the same size**?

**Unwanted** behavior:  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/a/2a68a8d5f5fb6a8fdd110320852505fa7f92db3e.png)

**Desired** behavior:

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/9/a/9a51427d8202b24e79470fd1c8c83775cc7cbb3a.png)

Best Regards.

---

<div class="post-metadata">

**Author:** ![stat](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/stat/32/32530_2.png) [@stat](https://forum.inductiveautomation.com/u/stat)\
**Post date:** [June 2, 2022, 7:16pm UTC](https://forum.inductiveautomation.com/t/template-2-concentric-circles/60185/2 "2022-06-02T19:16:09Z")

</div>

If you want to keep the inner circle at a fixed size as you resize the template, you’ll need to set the circle use an [Anchored Layout](https://docs.inductiveautomation.com/display/DOC81/Working+with+Vision+Components#WorkingwithVisionComponents-AnchoredLayout) and select the Center Vertically and Center Horizontally options. Since you are using a template, by default templates ignore layout configurations on any contents inside them so you have to set the [Enable Layout](https://docs.inductiveautomation.com/display/DOC81/Vision+Templates#:~:text=settings%2C%20set%20the-,Enable%20Layout,-property%20to%20true) property to True on the template.

---

<div class="post-metadata">

**Author:** ![Alberto\_AG](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@Alberto\_AG](https://forum.inductiveautomation.com/u/Alberto_AG)\
**Post date:** [June 13, 2022, 2:38pm UTC](https://forum.inductiveautomation.com/t/template-2-concentric-circles/60185/3 "2022-06-13T14:38:42Z")

</div>

Thank you very much.