# Template Repeater not showing images

**URL:** <https://forum.inductiveautomation.com/t/template-repeater-not-showing-images/16353>\
**Category:** Ignition\
**Created:** [December 18, 2017, 7:12pm UTC](https://forum.inductiveautomation.com/t/template-repeater-not-showing-images/16353 "2017-12-18T19:12:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Claus\_Nielsen](https://avatars.discourse-cdn.com/v4/letter/c/77aa72/32.png) [@Claus\_Nielsen](https://forum.inductiveautomation.com/u/Claus_Nielsen)\
**Post date:** [December 18, 2017, 7:12pm UTC](https://forum.inductiveautomation.com/t/template-repeater-not-showing-images/16353/1 "2017-12-18T19:12:28Z")

</div>

Hello All,

I have a problem with some template repeaters that doesn’t show images after the PC running the Gateway was shutdown due to power failure. The problem seems to be with Template Repeaters only. Using the builtin images.  
When the screen loads the images is shown for maybe half a second then disappears.  
Any suggestions anyone?