# Templates in Perspective **URL:** \ **Category:** Ignition\ **Created:** [February 25, 2020, 4:35pm UTC](https://forum.inductiveautomation.com/t/templates-in-perspective/32592 "2020-02-25T16:35:18Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![cmallonee](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/cmallonee/32/6416_2.png) [@cmallonee](https://forum.inductiveautomation.com/u/cmallonee)\ **Post date:** [February 25, 2020, 5:34pm UTC](https://forum.inductiveautomation.com/t/templates-in-perspective/32592/2 "2020-02-25T17:34:19Z")
> [@UDT Parameter on Perspective view](http://forum.inductiveautomation.com/t/udt-parameter-on-perspective-view/23061/2): > > To do this you will do the following: Create a new view that will be used as a drop target for your UDT. This would be similar to a template in vision. In the View, there is a dropConfig.udts property. You will configure this in the following way: type: The name of the UDT Definition param: A value you select that will be defined in the PARAMS area of the view later on action: For property binding purposes, use bind. For indirect tag bindings, use path In the View PARAMS area, add a new… --- _[View the full topic](https://forum.inductiveautomation.com/t/templates-in-perspective/32592)._