# Thank You, Community! **URL:** \ **Category:** General Discussion\ **Created:** [December 8, 2023, 3:44pm UTC](https://forum.inductiveautomation.com/t/thank-you-community/82899 "2023-12-08T15:44:23Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![kssp](https://avatars.discourse-cdn.com/v4/letter/k/bb73d2/32.png) [@kssp](https://forum.inductiveautomation.com/u/kssp)\ **Post date:** [December 8, 2023, 3:44pm UTC](https://forum.inductiveautomation.com/t/thank-you-community/82899/1 "2023-12-08T15:44:23Z")
Good morning, forum community. I just wanted to take a minute to thank all who participate in making this a productive environment. As a first-time user of ignition back in August, this place helped me an incredible amount during my Co-Op rotation. I was able to create some pretty amazing projects that my company is considering rolling out on a much larger scale in the future! This software is so powerful and intuitive. I would not have been nearly as successful as I was without it. Not to mention, when I got stuck at a turn, I always had some folks on here willing to help out with it. My Co-Op term is coming to an end, and I will in turn be losing access to practically everything associated with it. I will certainly be pushing to get licensure wherever I go full-time after graduation. A special thanks to @bschroeder , @Transistor , @pturmel , @JordanCClark , @bkarabinchak.psi , @nminchin , @paul-griffith , and many others. Even if I did not interact with you directly, the many times that I read up on topics you've covered have dramatically helped in my learning. Until we meet again, Thank you!! ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [December 8, 2023, 4:01pm UTC](https://forum.inductiveautomation.com/t/thank-you-community/82899/2 "2023-12-08T16:01:42Z")
Consider transferring your activity here to a personal email address, so it stays with you. (Along with any Inductive University progress you've made.) ---
**Author:** ![bkarabinchak.psi](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/bkarabinchak.psi/32/83567_2.png) [@bkarabinchak.psi](https://forum.inductiveautomation.com/u/bkarabinchak.psi)\ **Post date:** [December 8, 2023, 4:24pm UTC](https://forum.inductiveautomation.com/t/thank-you-community/82899/3 "2023-12-08T16:24:11Z")
A thank you post and you're still helping people, you should be canonized as an Ignition Saint! ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [December 8, 2023, 4:41pm UTC](https://forum.inductiveautomation.com/t/thank-you-community/82899/4 "2023-12-08T16:41:56Z")
> [@pturmel](#): > > Consider transferring your activity here to a personal email address @kssp - go here: [https://support.inductiveautomation.com/hc/en-us/articles/4422927205261-Transfer-Credentials-Certifications](https://support.inductiveautomation.com/hc/en-us/articles/4422927205261-Transfer-Credentials-Certifications) and thank you for the thanks. ---
**Author:** ![kssp](https://avatars.discourse-cdn.com/v4/letter/k/bb73d2/32.png) [@kssp](https://forum.inductiveautomation.com/u/kssp)\ **Post date:** [December 8, 2023, 5:41pm UTC](https://forum.inductiveautomation.com/t/thank-you-community/82899/5 "2023-12-08T17:41:22Z")
You two are hilarious! Will definitely be doing this. We will see what capacity I use it with on my own. ---
**Author:** ![Transistor](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/transistor/32/3380_2.png) [@Transistor](https://forum.inductiveautomation.com/u/Transistor)\ **Post date:** [December 8, 2023, 5:59pm UTC](https://forum.inductiveautomation.com/t/thank-you-community/82899/6 "2023-12-08T17:59:20Z")
> [@kssp](#): > > We will see what capacity I use it with on my own. Don't forget there's the Maker edition which should give you months of fun. Have a look around for Nadir Chinichian's Home Automation on [YoutTube](https://www.youtube.com/watch?v=R17np48W83g&ab_channel=NaderChinichian).