# Thermometer Display - Adding more intervals

**URL:** <https://forum.inductiveautomation.com/t/thermometer-display-adding-more-intervals/92812>\
**Category:** Ignition\
**Created:** [July 4, 2024, 6:39pm UTC](https://forum.inductiveautomation.com/t/thermometer-display-adding-more-intervals/92812 "2024-07-04T18:39:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![GonPostL](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/gonpostl/32/63038_2.png) [@GonPostL](https://forum.inductiveautomation.com/u/GonPostL)\
**Post date:** [July 4, 2024, 6:39pm UTC](https://forum.inductiveautomation.com/t/thermometer-display-adding-more-intervals/92812/1 "2024-07-04T18:39:49Z")

</div>

I am using the thermometer displays to show winding temps for a blower. I would like to have a different interval for when not in use, normal operating, high operating, and an interval for if the temperature reading is astronomically high showing a thermocouple/rtd fault. Is there a way to add a 4th interval?

---

<div class="post-metadata">

**Author:** ![simeonw](https://avatars.discourse-cdn.com/v4/letter/s/4da419/32.png) [@simeonw](https://forum.inductiveautomation.com/u/simeonw)\
**Post date:** [July 4, 2024, 10:47pm UTC](https://forum.inductiveautomation.com/t/thermometer-display-adding-more-intervals/92812/2 "2024-07-04T22:47:33Z")

</div>

You can add pretty well as many intervals as you like. Click the [+] to the right of the intervals prop to add another array element, then define the color, low and high values.

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/b/7/b742eb9e8269fc8a0f1109ef6a53cfef67d291a3.png)

Keep in mind, the graphic will only show the limits if they are close enough to the **highBound** value of your chart. If the **highBound** value is, say 120, and the **low** value of the interval is 150 the interval indicator will disappear off the chart.

If you want a different set of intervals, you can make them dynamic using a binding on the intervals prop itself.

---

<div class="post-metadata">

**Author:** ![GonPostL](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/gonpostl/32/63038_2.png) [@GonPostL](https://forum.inductiveautomation.com/u/GonPostL)\
**Post date:** [July 5, 2024, 5:31pm UTC](https://forum.inductiveautomation.com/t/thermometer-display-adding-more-intervals/92812/3 "2024-07-05T17:31:05Z")

</div>

That worked! Thank you!