# TI 500 running TISOFT 2 r4.3

**URL:** <https://forum.inductiveautomation.com/t/ti-500-running-tisoft-2-r4-3/43759>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [February 24, 2021, 12:34am UTC](https://forum.inductiveautomation.com/t/ti-500-running-tisoft-2-r4-3/43759 "2021-02-24T00:34:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![witman](https://avatars.discourse-cdn.com/v4/letter/w/d2c977/32.png) [@witman](https://forum.inductiveautomation.com/u/witman)\
**Post date:** [February 24, 2021, 12:34am UTC](https://forum.inductiveautomation.com/t/ti-500-running-tisoft-2-r4-3/43759/1 "2021-02-24T00:34:51Z")

</div>

Does anyone know of a reasonable way to connect this museum piece to Ignition?

---

<div class="post-metadata">

**Author:** ![peter](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@peter](https://forum.inductiveautomation.com/u/peter)\
**Post date:** [February 24, 2021, 12:43am UTC](https://forum.inductiveautomation.com/t/ti-500-running-tisoft-2-r4-3/43759/2 "2021-02-24T00:43:29Z")

</div>

Kepware suggests that it can [talk to a TI 500](https://www.kepware.com/en-us/products/kepserverex/drivers/simatic-ti-505-serial/). From there it’s just a quick OPC UA hop to Ignition.

* * *

Kepware is just a suggestion, I’m sure there are other products out there that would do teh same job.