# TickManager warning flooding logs

**URL:** <https://forum.inductiveautomation.com/t/tickmanager-warning-flooding-logs/97959>\
**Category:** Ignition\
**Created:** [October 30, 2024, 3:11pm UTC](https://forum.inductiveautomation.com/t/tickmanager-warning-flooding-logs/97959 "2024-10-30T15:11:53Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![USR9000](https://avatars.discourse-cdn.com/v4/letter/u/5f9b8f/32.png) [@USR9000](https://forum.inductiveautomation.com/u/USR9000)\
**Post date:** [October 30, 2024, 3:11pm UTC](https://forum.inductiveautomation.com/t/tickmanager-warning-flooding-logs/97959/1 "2024-10-30T15:11:53Z")

</div>

Hello Everyone,

I am seeing a tickmanager entries non stop the message says:

“Aggregate callback time exceeded tick rate x \> 250ms “

x is a number greater than 250.

Any ideas on what the issue will be or how to prevent this message from showing on the logs ?

Thanks

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 30, 2024, 3:29pm UTC](https://forum.inductiveautomation.com/t/tickmanager-warning-flooding-logs/97959/2 "2024-10-30T15:29:33Z")

</div>

You could turn the logger off, but otherwise it looks like the only thing to do might be slow down the sampling interval of some of the tags configured @ 250ms.

How far beyond 250ms are your `x` values? There must be a lot of Monitored Items @ 250ms for this warning to trigger.

---

<div class="post-metadata">

**Author:** ![USR9000](https://avatars.discourse-cdn.com/v4/letter/u/5f9b8f/32.png) [@USR9000](https://forum.inductiveautomation.com/u/USR9000)\
**Post date:** [October 30, 2024, 4:29pm UTC](https://forum.inductiveautomation.com/t/tickmanager-warning-flooding-logs/97959/3 "2024-10-30T16:29:55Z")

</div>

Thanks @Kevin.Herron , will this be the configuration set on the Tag groups ? If so there is no groups configured at 250ms

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [October 30, 2024, 4:44pm UTC](https://forum.inductiveautomation.com/t/tickmanager-warning-flooding-logs/97959/4 "2024-10-30T16:44:42Z")

</div>

External OPC UA clients? Simulator or TCP devices? Not sure what else would cause this...

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [October 30, 2024, 4:52pm UTC](https://forum.inductiveautomation.com/t/tickmanager-warning-flooding-logs/97959/5 "2024-10-30T16:52:31Z")

</div>

Transaction groups with OPC items?