# Time Series Chart Error

**URL:** <https://forum.inductiveautomation.com/t/time-series-chart-error/93614>\
**Category:** Ignition\
**Tags:** ignition81, perspective\
**Created:** [July 23, 2024, 4:55pm UTC](https://forum.inductiveautomation.com/t/time-series-chart-error/93614 "2024-07-23T16:55:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pat\_Cunningham](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pat_cunningham/32/57710_2.png) [@Pat\_Cunningham](https://forum.inductiveautomation.com/u/Pat_Cunningham)\
**Post date:** [July 23, 2024, 4:55pm UTC](https://forum.inductiveautomation.com/t/time-series-chart-error/93614/1 "2024-07-23T16:55:10Z")

</div>

Every time I load my chart I initially get an error. It lasts for a couple seconds and then the chart loads. I there anyway to avoid this?

 ![Screenshot 2024-07-23 125424](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/9/e96077edab76a58676194cbeae503048a453f65a.png)

---

<div class="post-metadata">

**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\
**Post date:** [July 23, 2024, 5:35pm UTC](https://forum.inductiveautomation.com/t/time-series-chart-error/93614/2 "2024-07-23T17:35:22Z")

</div>

You could try looking at bindings and if persistent is set or not. It really depends on how you are getting data... no telling by just a screenshot.

---

<div class="post-metadata">

**Author:** ![Pat\_Cunningham](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pat_cunningham/32/57710_2.png) [@Pat\_Cunningham](https://forum.inductiveautomation.com/u/Pat_Cunningham)\
**Post date:** [July 23, 2024, 6:38pm UTC](https://forum.inductiveautomation.com/t/time-series-chart-error/93614/3 "2024-07-23T18:38:31Z")

</div>

Here is how I am doing it. Tried with and without persistent

![Screenshot 2024-07-23 143529](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/8/48eba59e681d167037f0e87c4d16a420308a31bd.png)

 ![Screenshot 2024-07-23 143414](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/4/3450f9b777ac955a2b181e9cf81724d4f3d7e6f5.png)

---

<div class="post-metadata">

**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\
**Post date:** [July 23, 2024, 6:55pm UTC](https://forum.inductiveautomation.com/t/time-series-chart-error/93614/4 "2024-07-23T18:55:53Z")

</div>

I know I ran into the same issue, if persistent doesn't do it, maybe opt out of the overlay.

I would also try and find the error and if possible, fix that. Perhaps it's getting the wrong type of data and you might be able to handle that gracefully. You can get the error by hovering or clicking on the red circle, if time permits. Otherwise, maybe try and reproduce within the designer.

---

<div class="post-metadata">

**Author:** ![Pat\_Cunningham](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pat_cunningham/32/57710_2.png) [@Pat\_Cunningham](https://forum.inductiveautomation.com/u/Pat_Cunningham)\
**Post date:** [July 24, 2024, 4:51pm UTC](https://forum.inductiveautomation.com/t/time-series-chart-error/93614/5 "2024-07-24T16:51:02Z")

</div>

I appreciate your suggestions but nothing seems to work and I can't catch the error and it isn't logged. I am trying to figure out how I can maybe use some error handling in the binding.