# Timeseries chart not populating in report

**URL:** <https://forum.inductiveautomation.com/t/timeseries-chart-not-populating-in-report/49858>\
**Category:** Ignition\
**Created:** [August 12, 2021, 6:34pm UTC](https://forum.inductiveautomation.com/t/timeseries-chart-not-populating-in-report/49858 "2021-08-12T18:34:23Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![michael.black](https://avatars.discourse-cdn.com/v4/letter/m/ee7513/32.png) [@michael.black](https://forum.inductiveautomation.com/u/michael.black)\
**Post date:** [January 25, 2022, 6:56pm UTC](https://forum.inductiveautomation.com/t/timeseries-chart-not-populating-in-report/49858/11 "2022-01-25T18:56:24Z")

</div>

I ended up running into your post and tried that but no luck. I ended up figuring it out by adding a header section and then checking only the 'new page per row' box which worked out perfect.

More an explanation can be seen at

> [@Start next row of tablegroup on next page](https://forum.inductiveautomation.com/t/start-next-row-of-tablegroup-on-next-page/55367):
>
> I have a simple report showing pump name, a simple table related to that pump, and a timeseries chart. I have 10 pumps and have used one parent query and two child queries to populate the data. I have created one tablegroup “Pumps”. I then have it go through each pump pulling data from a database to populate the pump name, table, and chart for each pump one after another. Everything is populating correctly except the spacing. I can’t fit two pumps on one page unless I make everything alot s…

Thanks though! I know some of these small issues can take a bit of time to figure out

---

_[View the full topic](https://forum.inductiveautomation.com/t/timeseries-chart-not-populating-in-report/49858)._