# Touch Screens for Ignition? **URL:** \ **Category:** General Discussion\ **Created:** [January 11, 2018, 4:55pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565 "2018-01-11T16:55:10Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![abishur](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/abishur/32/9096_2.png) [@abishur](https://forum.inductiveautomation.com/u/abishur)\ **Post date:** [January 11, 2018, 4:55pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565/1 "2018-01-11T16:55:10Z")
I was curious if anyone has used a stand alone touch screen that they really liked with Ignition. I’m trying to find a good Class 1 Division 2 panel mount touch screen to update a system off older equipment onto Ignition. ---
**Author:** ![MMaynard](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/mmaynard/32/3366_2.png) [@MMaynard](https://forum.inductiveautomation.com/u/MMaynard)\ **Post date:** [January 11, 2018, 7:41pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565/2 "2018-01-11T19:41:44Z")
We have had great success with these [http://www.aispro.com/products/hmi-tcnd0u-10ar-x00h](http://www.aispro.com/products/hmi-tcnd0u-10ar-x00h) We order with 8 GB ram, solid state HDD and Windows 7 64Bit ---
**Author:** ![josehr](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@josehr](https://forum.inductiveautomation.com/u/josehr)\ **Post date:** [January 11, 2018, 10:33pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565/3 "2018-01-11T22:33:23Z")
> [@abishur](#): > > Class 1 Division 2 Take a look at [www.tangent.com](http://www.tangent.com) ---
**Author:** ![dcamp](https://avatars.discourse-cdn.com/v4/letter/d/a88e4f/32.png) [@dcamp](https://forum.inductiveautomation.com/u/dcamp)\ **Post date:** [January 12, 2018, 3:29pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565/4 "2018-01-12T15:29:52Z")
You owe it to yourself to check out **Maple Systems** , they have a wide selection and very cost effective. ---
**Author:** ![abishur](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/abishur/32/9096_2.png) [@abishur](https://forum.inductiveautomation.com/u/abishur)\ **Post date:** [January 12, 2018, 3:53pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565/5 "2018-01-12T15:53:38Z")
Thanks for the feedback! ---
**Author:** ![heybales](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/heybales/32/3358_2.png) [@heybales](https://forum.inductiveautomation.com/u/heybales)\ **Post date:** [January 15, 2018, 7:02pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565/6 "2018-01-15T19:02:49Z")
If you are looking for separate monitor from the PC, check out > **[Industrial Monitors & Touch Screens - Hope Industrial Systems](https://www.hopeindustrial.com/)** > > Affordable Rugged Industrial Touch Screens, Monitors, and Workstations. NEMA 4/4X and IP65/IP66 washdown certified. Standard 5-year Warranty. In stock and ready to ship! I’ve used a couple of different vendors for industrial PCs. I’m about to try this one for the first time. > **[Fanless Industrial Intel Broadwell NUC Computer](https://www.onlogic.com/ml100g-30/)** > > Fanless Intel Broadwell i3/i5 designed around the Intel NUC small form factor, ideal for industrial environments. It’s using Intel’s NUC technology, which seems perfect for HMI. ---
**Author:** ![jeremy.anderson](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@jeremy.anderson](https://forum.inductiveautomation.com/u/jeremy.anderson)\ **Post date:** [June 4, 2019, 3:44pm UTC](https://forum.inductiveautomation.com/t/touch-screens-for-ignition/16565/7 "2019-06-04T15:44:24Z")
This thread is a year old, but I thought I would add my experience to maybe help someone down the road. I have been using small fanless industrial computers from Logic Supply (as suggested above) with great success for the past year. They are very small, no moving parts, and the case is a nice heat sink. You can spec them with DIN rail or VESA mounts, auto power on (great for power outage recovery), and Windows 10 IOT which eliminates some of the annoying auto updates. They are not very powerful (Pentium/Celeron), but don’t need to be to run Ignition clients and have run any HMI application I have thrown at them easily. [https://www.logicsupply.com/cl210g-11/](https://www.logicsupply.com/cl210g-11/) I pair them with Atlas industrial touchscreens from AutomationDirect. [Atlas Industrial Touchscreen Monitors](https://www.automationdirect.com/adc/shopping/catalog/hmi_(human_machine_interface)/atlas_industrial_monitors/atlas_industrial_monitors_(15_inch_-_19_inch)/atm1500t)