# Transaction Group not resetting trigger **URL:** \ **Category:** Maker\ **Created:** [August 22, 2020, 2:55pm UTC](https://forum.inductiveautomation.com/t/transaction-group-not-resetting-trigger/37996 "2020-08-22T14:55:46Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![tristram.chapman](https://avatars.discourse-cdn.com/v4/letter/t/ed655f/32.png) [@tristram.chapman](https://forum.inductiveautomation.com/u/tristram.chapman)\ **Post date:** [August 22, 2020, 2:55pm UTC](https://forum.inductiveautomation.com/t/transaction-group-not-resetting-trigger/37996/1 "2020-08-22T14:55:46Z")
Hi All, I’ve been deploying on ignition vision for work and decided to play around with the maker edition to get a handle on the perspective module, as well as do something around the house. I’m trying to get a transaction to the database to work - without success. The transaction itself is working but the function to reset the trigger is not working. I’m using a standard transaction group with 4 tags - one of which is writing to the database, the other 3 make up the fail/success bits and the trigger; all of which are set to read only as the target. The transaction is set as ‘opc to db’. Anyone successfully managed to do this in the maker edition? I have a similar setup running in vision on a full blown version of ignition so i know it should -theoretically- work. Cheers, Tristram ---
**Author:** ![duane502](https://avatars.discourse-cdn.com/v4/letter/d/b38774/32.png) [@duane502](https://forum.inductiveautomation.com/u/duane502)\ **Post date:** [August 30, 2020, 3:57pm UTC](https://forum.inductiveautomation.com/t/transaction-group-not-resetting-trigger/37996/2 "2020-08-30T15:57:56Z")
I’m not sure about Maker, but in 7.9 you can’t have the trigger be read only if you want to reset it. I’m using a CTU that when it’s at 2 I trigger the transaction group, and the reset sets it back to 1 in the plc.