# Transaction Groups Hung up After Failed Execution **URL:** \ **Category:** Ignition\ **Tags:** ignition81\ **Created:** [November 10, 2022, 4:37pm UTC](https://forum.inductiveautomation.com/t/transaction-groups-hung-up-after-failed-execution/66358 "2022-11-10T16:37:45Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Ryan\_Blahnik](https://avatars.discourse-cdn.com/v4/letter/r/3ec8ea/32.png) [@Ryan\_Blahnik](https://forum.inductiveautomation.com/u/Ryan_Blahnik)\ **Post date:** [November 10, 2022, 4:37pm UTC](https://forum.inductiveautomation.com/t/transaction-groups-hung-up-after-failed-execution/66358/1 "2022-11-10T16:37:45Z")
I am using a few transaction groups to record CIP data for one of my customers. On a rare occasion they sometimes fail to execute, and when that occurs it appears to get the entire transaction group hung up. It doesn't appear to attempt to re-execute, and all future triggers don't execute as well. The only way I get the group to function again is by going into designer and disabling, and then re-enabling the transaction groups. Is there a way to automatically continue execution after a failed execution occurs? or to at least ignore the failed execution, so future executions continue as normal? Thanks, Ryan ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/e/2/e2fcebc96775249b644761ec025c745b9c9e254f.jpeg) ---
**Author:** ![Munkhbat\_Munkhtulga](https://avatars.discourse-cdn.com/v4/letter/m/958977/32.png) [@Munkhbat\_Munkhtulga](https://forum.inductiveautomation.com/u/Munkhbat_Munkhtulga)\ **Post date:** [November 16, 2022, 9:39pm UTC](https://forum.inductiveautomation.com/t/transaction-groups-hung-up-after-failed-execution/66358/2 "2022-11-16T21:39:10Z")
Hi Ryan, I do not think there is a functionality where you can automate the disable and reenable process. Please reach out to [support](https://www.inductiveautomation.com/support/home/) if this becomes a frequent issue.