# Trend drawings - Averaging

**URL:** <https://forum.inductiveautomation.com/t/trend-drawings-averaging/19690>\
**Category:** Ignition\
**Created:** [September 17, 2018, 3:38pm UTC](https://forum.inductiveautomation.com/t/trend-drawings-averaging/19690 "2018-09-17T15:38:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mt1](https://avatars.discourse-cdn.com/v4/letter/m/53a042/32.png) [@mt1](https://forum.inductiveautomation.com/u/mt1)\
**Post date:** [September 17, 2018, 3:38pm UTC](https://forum.inductiveautomation.com/t/trend-drawings-averaging/19690/1 "2018-09-17T15:38:36Z")

</div>

Hi to everyone,  
I’ve got a problem on my plant, so I’m tracing a lot of pens to take care of it.  
I have to control if the routine I’ve written is doing well in calculate weight on a multi-level tank (the tank has separators inside) with only one weight transimtter: I activate the campute only when dedicated valve opened.  
Timing is important and value too, but in trend I cannot achive that!

If you look at the query browser you see that there’s no point between 2018-09-14 17:08:43 and 2018-09-15 04:14:43 but the graph indicate a slow ramp!  
At first look seems my routine wash wrong, but was not: this data has been “invented” by the averaging function! ☹ ☹

I can not afford it  
How I can disable it?

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/inductiveautomation/original/2X/5/5dff9e57b1c4c0a5f16ae863a56031de32b4e218.png)

![](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/inductiveautomation/original/2X/1/19e72e09c5932dbb94a2ca1a93ff3cb29ed2840c.png)